RIDER 6-PIECE BEVEL EDGE CHISEL SET WITH HORNBEAM HANDLE

6, 10, 12, 16, 20 and 25mm only require final honing.

Ground and polished, fine-grained, chrome manganese steel.

Hardened and tempered to 59 HRC stays sharp longer.

Woodworkers love wood, so the Rider bevel edge chisels are manufactured with handles made from dense European Hornbeam, chosen for its resilience.
Sanded smooth and a light oil finish, the Hornbeam has a superb feel in the hand. The wider chisels have slightly larger handles to maintain balance across the range of sizes. It is a subtle difference, but enough to make each chisel feel 'right' in the hand. Each handle ends in a polished stainless steel ferrule with a shock absorbing leather washer between the handle and the chisel’s bolster.

The blades are fine-grained, chrome manganese steel, carefully hardened and tempered to 59 HRC. Sharpened and ground with a 25° bevel, the blades require only final honing to achieve a fine, long lasting edge (we suggest a 30° micro-bevel). In cross section, the blades are slimmer than a standard chisel with a narrower land on each side, to a little over 1mm. This allows much improved clearance when working into a corner such as cleaning dovetails. Supplied in a strong wooden case; this 6-piece set comprises the following sizes: 6mm, 10mm, 12mm, 16mm, 20mm and 25mm. The blades are approximately 100mm long with the overall length varying between 265mm to 280mm. European made.