KLEIN FORSTNER BIT SET
Beautiful Poplar body blanks for guitar and bass builds.Choose the size and the grade that suits your needs.If the stock notification request is trigg..
20.91€
Ex Tax:17.00€
Beautiful Bubinga body blanks for guitar and bass builds.Choose the size and the grade that suits your needs.If the stock notification request is trig..
55.35€
Ex Tax:45.00€
Out Of Stock
Beautiful American Pine body blanks for guitar and bass builds.Choose the size and the grade that suits your needs.If the stock notification request i..
31.98€
Ex Tax:26.00€
Beautiful American Walnut body blanks for guitar and bass builds.Choose the size and the grade that suits your needs.If the stock notification request..
59.04€
Ex Tax:48.00€
Beautiful Basswood body blanks for guitar and bass builds.Choose the size and the grade that suits your needs.If the stock notification request is tri..
30.75€
Ex Tax:25.00€
Carbon nuts for a dry tone. Hard to be chipped.
Made in Japan
HOS..
2.99€
Ex Tax:2.43€
Carbon nuts for a dry tone. Hard to be chipped.
Made in Japan
HOS..
2.99€
Ex Tax:2.43€
Carbon nuts for a dry tone. Hard to be chipped.
Made in Japan
HOS..
2.99€
Ex Tax:2.43€
High quality nut files set (3 files) for bass guitars from Hosco, Japan. Files are .45"/.85", .65"/.105" and .75"/.130"These files are made by hand an..
91.29€
Ex Tax:74.22€
High quality fret puller with flattened blades, from Hosco, Japan. Not suitable to cut wire. Use it only for fret pulling.HOS (TL-TC10)..
53.26€
Ex Tax:43.30€
You will be able to create a uniform chamfer on the edge of the workpiece in a simple way.Chamfer size is adjusted easily by changing the height of th..
58.75€
Ex Tax:47.76€
2 flutes.Dimensions (check diagram photo):S: 8mm or 10 mm - Choose desired when adding to cart.D: 8mm or 10 mm - Choose desired when adding to cart.B:..
25.00€
Ex Tax:20.33€
Dimensions (check diagram photo):S: 6mm or 1/4" (6.35mm) - Choose desired shank when adding to cart.D: 12.7mmB: 13mmL: 55mm..
41.25€
Ex Tax:33.54€
Dimensions (check diagram photo):S: 6mm/6.35mm (1/4") - Select desired when adding to cart.D: 12.7mmB: 19mmL: 55mm..
43.75€
Ex Tax:35.57€
Out Of Stock
Dimensions (check diagram photo):S: 6mm or 1/4" (6.35mm) - Choose desired shank when adding to cart.D: 12.7mmB: 25.4mmL: 64mm..
45.00€
Ex Tax:36.59€
Out Of Stock
Material: High Speed SteelType: 19 mm / 0.75 inLength: 48mm..
2.50€
Ex Tax:2.03€
Made of high carbon steel with heat treatment.Brad Point starts bit drilling on center, eliminates the need for a center punch.Hex shank.Length: 230mm..
3.00€
Ex Tax:2.44€
/drill-300x300.jpg "3.5MM ROUTER BIT FOR CARBON FIBER TRUSS RODS")
/drill2-300x300.jpg "3.5MM ROUTER BIT FOR CARBON FIBER TRUSS RODS")
Out Of Stock
With this router bit you're able to drill the perfect slot for carbon fiber truss rods.Carbon fiber truss rods have 3.3mm on diameter, and normally th..
38.00€
Ex Tax:30.89€
Diameter: 3mmLength: 250mmPerfect for drilling the electronics ground hole and also the tremolo's spring claw fixing holes, paired with our Spring Cla..
15.00€
Ex Tax:12.20€
