- STOCK: IN STOCK
- MODEL: GW-SCHDJ
Check our YouTube video to see it in use.
Mark the center line and lock the jig in place with some double sided tape or with 2 wood screws (already included with the jig) and drill the holes with our 3mm long drill bit.
When installing a tremolo bridge on your brand new guitar there's a lot of things you need to be careful with. One of them being the spring claw placement.
For start you don't want it to be off center and also you will need an easy access to the screws that hold it in place, which will be particularly needed when setting up the bridge itself.
This little, inexpensive jig helps you get the perfect angle and position for the spring claw each time you have to install one.
It features 2 screw spacings (34mm and 29.5mm), making it suitable for both vintage and modern style trem systems - 34mm is usually used on Fender and Gotoh hardware.
The drilling holes are made at an exact 6 degree angle to allow you an easy access to the screws when fitting them to the body.
The spacing to be used must always be on the bottom side.
Made of aluminium.
Dimensions: 50mm x 50mm x 30mm
